Table of Contents
Advertisement
Code
Feature & Display
Setting the memory reception
alert
RECEIVE ALERT
=ON
#44
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
Setting the Error Correction
Mode (ECM)
ECM SELECTION
#68
=ON
To send a fax even if there is static
interference on the telephone line.
Setting the connecting tone
CONNECTING TONE
=ON
If you often have trouble when
#76
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
Saving on toner consumption
TONER SAVE
#79
=OFF
Resetting advanced features to
their default settings
#80
SET DEFAULT
RESET=NO
Settings
ON
[±]
OFF
ON
[±]
OFF
ON
[±]
OFF
ON
[±]
OFF
YES
[±]
NO
(The default setting is in bold type.)
Features Summary
How the unit operates
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
This feature is available when the
transmitting/receiving stations are
ECM compatible.
You can confirm the status of the
other party's machine.
If the ring back tone continues, the
other party's machine may not be
a facsimile or may have run out of
paper. Check with the other party.
The connecting tone volume
cannot be adjusted.
"ON": The toner cartridge will last
longer.
This feature may lower the print
quality.
1. Follow steps 1 and 2 on page 64.
+
2. Press
or
w
3. Press
.
w
4. Press
again.
p
5. Press
-
to select "YES".
.
65
Advertisement
Table of Contents
