Table of Contents
Advertisement
Envelopes
Use envelopes designed for laser printing. We recommend the following:
— High quality envelopes of 90
— Envelopes that have thin, sharply creased leading
edges, and
— Envelopes that have diagonal seams as shown. (right)
You can load up to 10 envelopes of 90 g/m
time for printing. Print side must face down.
Remove each envelope after printing.
Wrinkles may occur in some cases, even if high quality
envelopes are used.
Avoid printing in high humidity, above 70% relative
humidity (RH). High humidity may cause the envelope to
curl, pick up excess toner or seal the envelope.
Avoid printing below 10 °C with less than 30% RH, or it
may cause light printing.
Store envelopes away from moisture and humidity, where
they can lay flat and their edges will not be bent or
damaged. The humidity should not exceed 70% RH.
Do not use envelopes with any of the following
characteristics (using these may result in paper jams):
Irregularly shaped envelopes
Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage
Envelopes with side seam construction
Highly textured envelopes, or envelops with extremely
shiny surfaces
Envelopes that seal by removing a peel-off strip
Envelopes with more than one flap to be sealed
Self-adhesive envelopes
Envelopes that are baggy or not sharply creased
Embossed envelopes
Envelopes that have previously been printed on
Envelopes that include cotton and/or fibre material
Do not attempt to print on any of the following types of
envelopes (these may cause damage to the fax machine):
Envelopes with clasps, snaps or tie strings
Envelopes with transparent windows
Envelopes that use encapsulated types of adhesive that do
not require moistening but rely on pressure to seal them
/m
2
paper,
g
2
paper at a
Printing (PC)
Insert envelopes
as shown.
Side seam
Peel-off strip
construction
Twist
Curl
Wave
Dog-ear
Clasp
Adjust the
recording
paper
guides.
Multiple flaps
Bent-edge
Self adhesive
Transparent window
55
Advertisement
Table of Contents
