Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
Programming table (cont.)
Code
Feature & Display
Setting the Caller ID list to print
automatically
#26
AUTO CALL. LIST
=ON
Receiving other size documents
AUTO REDUCTION
=ON
#37
To receive a fax document that is
longer than your recording paper.
Changing the display contrast
#39
LCD CONTRAST
=NORMAL
Changing the fax activation code
FAX ACTIVATION
=ON
If you use an extension telephone
and wish to use it to receive a fax,
#41
activate this feature, and enter the
code (p. 47).
This code is also used to receive
a voice message and a fax in the
same call (p. 47).
64
(cont.)
ADVANCED MODE
PRESS SET
[±]
[±]
[±]
[±]
!
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
Step 3 may be slightly different depending on the
feature.
See page 60 for more details.
Settings
"ON": The unit will print the Caller
ON
ID list automatically after every 30
new calls (p. 30).
OFF
"ON": The unit will fit a received
ON
document onto your recording
paper.
"OFF": The unit will print the
OFF
original size.
"NORMAL": For normal contrast
NORMAL
"DARKER": Used when the display
contrast is too light.
DARKER
1. Follow steps 1 and 2 above.
2. Press
ON /
3. Press
CODE=? ? #9
4. Enter your code from 2 to 4 digits,
using 0–9, # and :.
5. Press
6. Press
Do not enter "0000".
OFF
(The default setting is in bold type.)
How the unit operates
+
-
or
to select "ON".
w
.
w
.
p
.
Advertisement
Table of Contents
