Binatone MR150 User Manual page 4

b. While the Channel icon is blinking, press the
(DOWN) button to select the desired channel. The channel
changes from 1 to 8, or from 8 to 1.
c. Press the MENU button to confirm your selection and
return to the normal mode.
3.6.1 Monitor
You can use the Monitor feature to check for weak signals
on the current channel.
a. To activate the Monitor function, press the MENU and
the (UP) button at the same time.
b. If you hear constant noise and hissing sound, press the
MENU button once to turn off the Monitor function.
Note:
Refer to the "Channel Table" section of this Owner's Manual for
detailed frequency listing.
3.7 Channel Scan
Channel scan performs searches for active signals in an
endless loop from channels 1 to 8. This allows you to find
other radios without having to change channel. To activate
this feature;
a. Press and hold down the
3 seconds. The channel number on the LCD Screen
changes rapidly until an active signal is detected.
b. When an active signal (one of the 8 channels) is detected,
channel scan pauses on the active channel.
c. Press the PTT button to communicate through the active
signal channel, and the channel scan will be deactivated.
(OR press the (UP) or
the channel scanning.)
d. Press the MENU button to stop the channel scanning
operation.
3.8 Key Lock
The Key Lock feature allows the user to disable the
(DOWN), and the MODE buttons so that the PMR settings
cannot be changed accidentally.
a. To activate the Key Lock feature, press and hold the
MENU button until the Key Lock icon (
on the LCD Screen.
b.
To deactivate the Key Lock feature, press and hold the
MENU button again until the Key Lock icon (
disappears on the LCD Screen.
The PTT, CALL, and the
functional even if the Key Lock feature is activated.
3.9 Calling (Paging) Tone
You can use the CALL button to send a tone to other users on
the same channel. To activate this feature;
a. With the PMR in normal mode, press and release the CALL
button. The unit will transmit a 2-second page tone to the
other unit/s set with the same channel within transmitting
range .
(UP) or
(UP) or (DOWN) button for
(DOWN) button to continue
(UP),
) appears
)
(Power) buttons will remain