Sending Documents Overseas; Changing The Logo Print Position - Panasonic KX-F900 Operating Instructions Manual

Sending documents overseas

You may experience difficulty in transmitting documents overseas. This feature will make sending documents
easier as the transmission speed is slowed down. Before starting the transmission procedure, follow the steps
below.
Press (MENU).
1
K B C
2 Press , then
Press (START/COPY/SET).
3
Press (‹) or (›) to select "ON".
4
¡If this feature is not required, select "OFF".
Press (START/COPY/SET).
5
Press (MENU).
6

Changing the logo print position

The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document's paper size (pre-selected setting).
IN: Inside of the transmitted document's paper size.
Press (MENU).
1
K B A
2
Press , then
Press (START/COPY/SET).
3
Press (‹) or (›) to select the desired
4
setting.
Press (START/COPY/SET).
5
Press (MENU).
6
40
SYSTEM SET UP
.
OVERSEAS MODE
MODE=OFF [ ÿŸ ]
ÿŸ
MODE=ON [ ]
SYSTEM SET UP
.
LOGO POSITION
MODE=OUT [ ÿŸ ]
(MENU)
Dial keypad
1 2 3
4 5 6
7 8 9
0
(‹) (›)
Note:
¡After transmission, this feature will be turned off
automatically.
Dial keypad (MENU)
1 2 3
4 5 6
7 8 9
0
(‹) (›)
(START/COPY/SET)
(START/COPY/SET)