Package Contents; Hardware Installation; Quick Installation Guide - D-Link DCS-5610 Quick Installation Manual

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
CS-5610
PTZ PoE
Internet
Camera

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector located
on the Internet Camera's back panel and attach it to the network.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter,
the Power LED on the DCS-5610 will turn green to indicate a proper
connection.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the Internet Camera's back panel (labeled DC 12V) and
connect it to an AC power outlet.
Note: When you have a proper connection, the LED will turn green.
The light may cycle on and off and your computer may show an
intermittent loss of connectivity, this is normal until you have
configured your Internet Camera.
DCS-5610
PTZ PoE Internet Camera
CD-ROM with
Manual and
Setup Wizard
CAT5 Ethernet
Cable
2
12V Power
Adapter
Camera Stand