Panasonic VDR-D160GN Operating Instructions Manual page 56

Manual recording functions
To set the white balance manually
Select [ ] mode, fill the screen with a white subject
and then move the joystick up to select [
When the [
≥ When the [
cannot be set because the place is dark etc. In this case, use the
automatic white balance.
∫ About the white balance sensor A
The white balance sensor detects the type of light source during
recording.
Do not cover the white balance sensor during recording, or it may
not function properly.
≥ When the [
white balance previously adjusted is stored.
Whenever recording conditions change, re-set the
white balance for correct adjustment.
≥ When the unit is turned on with the lens cap fitted,
the automatic white balance adjustment may not
function properly. Please turn the unit on after
removing the lens cap.
56
LSQT1184
] display changes from flashing to on, setting is complete.
] display continues flashing green, the white balance
] display flashes white, the manual
].
≥ When setting both the white balance and the iris/
gain, set the white balance first.
MNL
A