Fitting The Lens Cap - Panasonic VDR-D160GN Operating Instructions Manual

Fitting the lens cap

Fit the lens cap to protect the surface of the lens.
The lens cap and lens cap cord comes preattached to the grip belt.
≥ When not using the lens cap, pull the lens
cap cord in the direction of the arrow. A
≥ When you are not recording, be sure to
cover the lens with the lens cap for
protection. B
≥ When you remove the lens cap, press the knobs firmly.
≥ If the lens cap cord has come off
Pass the end of the lens cap cord through the attached eye
on the lens cap. Then pass the lens cap through the loop
made by itself and pull tight.
Tripod receptacle
This is a hole for attaching the unit to the optional tripod.
(Please carefully read the operating instructions for how to attach
the tripod to the unit.)
≥ When the tripod is used, the card slot cover cannot be opened.
Insert an SD card before attaching this unit to the tripod. (l 25)
Parts identification and handling
A
B
11
LSQT1184