Foreword; Product Profile; Lcd; Scanning Frequencies - Philips 220VW9FB/97 Service Manual

1. FOREWORD

This specification describes a 21.6" SXGA multi-scan color TFT LCD monitor with maximum resolution up to 1680 x
1050 /60 non-interlaced. All optical characteristics (including WHITE-D, Brightness, and so on) are determined
according to panel specification after warming up approximate 30 minutes that brightness stability is optimal, and
follow strictly after panel specification.

2. PRODUCT PROFILE

This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt
base.

2.1 LCD

Priority : 1. CPT
Type : TFT-LCD
Supplier offer the Panel specification.
Panel incoming specification : Follow Philips' specification.
LPL LM201W01-SLA1
Resolution
Outside dimensions
Pitch ( mm )
Color pixel arrangement
Display surface
Color depth
Backlight
Active area (WxH)
View angle (CR>10)
Contrast ratio
White luminance
Color gamut
Gate IC
Source IC
Response time

2.2 Scanning frequencies

Hor. : 30 – 83 K Hz
Ver.: 56 - 76 Hz
Video dot rate: < 165 MHz
Power input: 90-264 V AC, 50/60 ± 2 Hz
Power consumption : <60W maximum, <50W ( typ.)
Functions:
D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
2.3 Ambient temperature:

3. Electrical characteristics

: 1680x1050 (WSXGA+)
: 493.7(H) x 320.1(V) x 16.5D)
: 0.27675mm x 0.27675mm
: RGB strip arrangement
: Hard coating(3H) & Anti-Glare treatment of the front polarizer
: 16.7M colors
: 4 CCFL edge light system
: 464.94 x 290.5875mm
: 170/160 (typ) for Horizontal & Vertical
: 1000:1(typ)
: 300 nit(typ)
:72%(typ)
:
:
: 5 ms(typ)
0 °C - 40°C
HUDSON 9 75