Troubleshooting Guide; When Other Panasonic Products Respond To This Remote Control; To Reset This Unit - Panasonic Diga DMR-EZ47VEB Operating Instructions Manual

Troubleshooting Guide

When Other Panasonic Products
Respond to this Remote Control
Use this function to synchronize the codes for the
remote control and the main unit when there are other
Panasonic products close to your unit.
With the unit stopped

Press [FUNCTION MENU].
 Press [, ] to select "To Others", then press [OK].
 Press [, ] to select "Setup", then press [OK].
Press [, ] to select "Others", then press [].

 Press [, ] to select "Remote Control", then press
[OK].
Press [, ] to select the code ("DVD 1", "DVD 2"

or "DVD 3"), then press [OK].
Setup Remote Control
Tuning Press "n" and "OK" together
for more than 5 seconds on the remote
Disc
control.
Picture
Sound
Display
Connection
VHS
OK
RETURN
Others

While pressing and holding [OK],
press and hold the numbered button [1], [2] or [3]
corresponding to the code set in step  for more
than 5 seconds to set.

Press [OK] to complete.
When the following indicator appears on the unit's display
– Change the code on the remote control to match the code
displayed for the main unit (
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
step ).

To Reset This Unit

To reset the unit's settings
All the settings except for the ratings level, ratings password,
Owner ID and Clock return to the factory preset. The timer
recording programmes are also cancelled.
On the main unit
Press and hold [ CH] and [CH  ] for about 5
seconds.
– Refer to Tips of "Auto-Setup Restart" (
information.
To reset the ratings level settings
With the unit stopped

Press [ OPEN/CLOSE] to open the disc tray.

Press [DRIVE SELECT] to select the DVD drive.
On the main unit

Press and hold [ REC] and [] for about 5
seconds.
To restore the unit if it freezes
On the main unit
Press and hold [/I] for more than 10 seconds.
– The unit is turned off.
59) for detail
75
RQT8857