Advanced timer recording
Relief Recording
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the "HDD". If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded ("
" is displayed.) (➡ 29).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
RQT9088
26
Auto Renewal Recording
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press [OK].
3
Press [2, 1] to select "RENEW"
column.
4
Press [3, 4] to select "ON" and press
[OK].
Timer
Remain
HDD
30:24 SP
DVD
Recording
TUE 14.10.08. 12:53:00
HDD
Name
Date
Start
Stop
Mode
DVD
2A ARD
SUN
22:00
22:30
HDD
SP
All Services : ARD
Programme Name
[Note]
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.
1:58 SP
RENEW
ON