Installation Requirements; Tools And Parts - KitchenAid KGCU467VSS Installation Instructions Manual

IMPORTANT: Do not install a ventilation system that blows air downward toward this gas cooking appliance. This type of
ventilation system may cause ignition and combustion problems with this gas cooking appliance resulting in personal injury or
unintended operation.
In the State of Massachusetts, the following installation instructions apply:
Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by
I
the State of Massachusetts.
If using a ball valve, it shall be a T-handle type.
I
A flexible gas connector, when used, must not exceed 3 feet.
I
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools Needed
Adjustable wrench
Pipe wrench
Wrench or pliers
For LP/Natural Gas Conversions
Adjustable wrench
7 mm nut driver

INSTALLATION REQUIREMENTS

Tools and Parts

Flat-blade screwdriver
Pipe-joint compound
resistant to LP gas
Tape measure
/ " drive ratchet
3
8
Masking tape
Marker or pencil
/ " combination wrench
15
16
Noncorrosive leak-detection solution
/ " deep-well socket
1
2
3