Changing The Unit's Settings; Common Procedures; Tuning - Panasonic Diga DMR-EH58 Operating Instructions Manual

Changing the unit's settings

You can change the unit's settings using the Setup menu.
≥The settings remain intact even if you switch the unit to standby.

Common procedures

1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "To Others"
and press [OK].
3
Press [3, 4] to select "Setup" and
press [OK].
Menus
Tabs
Setup
Comb Filter
Still Mode
Seamless Play

Tuning

Disc
Picture
Sound
Display
Connection
Others
4
Press [3, 4] to select the tab and
press [1].
5
Press [3, 4] to select the menu and
press [OK].
6
Press [3, 4] to select the option and
press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Tuning
Manual Tuning
You can add or delete channels, or change programme positions.
Setup
Manual Tuning
Auto-Setup Restart
Download from TV
Tuning
Disc
Picture
Sound
Display
TAB
Connection
SELECT
Others
RETURN
OK
SELECT
OK
Delete Move
Add
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Red" button.
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Green" button.
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
the "Yellow" button.
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [OK].
[Note]
≥When the unit sets itself automatically with VIERA Link function
(➡ 10), only deletion of the programme position can be performed.
Options
On
On
TAB
SELECT
RETURN
OK
Manual Tuning
Pos Name Ch Pos Name Ch
1 ARD 4 11
2 ZDF 2 12
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6 16
7 17
8 18
9 19
RETURN
10 20
To change the tuning settings for individual programme
position
e.g., [Australia]and]N.Z.]
Manual Tuning
Pos Name Ch Pos Name Ch
1 ARD 4 11
2 ZDF 2 12
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6 16
7 17
SELECT
8 18
OK
9 19
RETURN
10 20
Delete Move
Add
1 Press [3, 4, 2, 1] to select a programme position and
press [OK].
2 Press [3, 4] to select an item and press [1].
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [OK].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between "Z" and "¢".
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to "Auto".
Video To select the video system type
§ Press [3, 4] to select "PAL" or "SECAM" if the
System
picture lacks colour, and press [OK].
≥Auto
This unit automatically distinguishes PAL and
SECAM signals.
≥PAL
For receiving PAL signals.
≥SECAM
For receiving SECAM signals.
This setting is also available when you select
the external input channel (AV1, AV2, AV3,
AV4) in step 1 (➡ above).
In order to record properly, make the
appropriate settings to match the connected
equipment.
Audio To select the audio reception type
If sound quality is poor, press [3, 4] to select
§
Mode
"BG", "I" or "DK" and press [OK].
≥BG
PAL B.G.
≥I
PAL I
≥DK
PAL D.K.K1
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound
is distorted due to inferior reception conditions,
or if you want to record the normal (mono)
sound during a stereo, bilingual or NICAM
broadcast, and press [OK].
§
Only for Asia and Middle East
Pos 1
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Mono Off
SELECT
RETURN
RETURN : leave
RQT9075
57