Section 3 - Configuration
If you selected Add New IP Filter:
Add IP Filter
Protocol
Select the protocol for ports that you want to allow or
deny access to. Choose between TCP, UDP or ICMP
or all of the above.
Source IP
Enter the source IP address that you wish to filter.
Source Port Number
Click the toggle if you wish enter a single port or a
range of ports that you wish to apply the changes to.
Separate port numbers with a comma.
Dest IP
Type in the destination IP address.
Destination Port
Click the toggle if you wish enter a single port or a
Number
range of ports that you wish to apply the changes to.
Separate port numbers with a comma.
D-Link DWR-932C User Manual
47