Use The Prosafe Plus Utility To Restore Factory Settings - NETGEAR ProSAFE GS105Ev2 User Manual

If you do not know the IP address of the switch, see
Browser on page 7.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > Maintenance > Factory Default.
The Factory Default page displays.
6. Select the check box.
7. Click the Apply button.
The switch returns to its factory settings. The switch reboots to load the restored
configuration.

Use the ProSAFE Plus Utility to Restore Factory Settings


To restore factory settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status page displays.
6. Select System > Maintenance > Factory Default.
The Factory Default page displays.
7. Select the check box.
8. Click the APPLY button.
The switch returns to its factory settings.
ProSAFE Gigabit Web Managed (Plus) Switches
Manage and Monitor the Switch
71
Access the Switch Using a Web