Add Tagged Or Untagged Ports To An 802.1Q-Based Vlan; Use Browser-Based Access To Add Tagged Or Untagged Ports To An 802.1Q-Based Vlan - NETGEAR ProSAFE GS105Ev2 User Manual

Add Tagged or Untagged Ports to an 802.1Q-Based VLAN

After you define a VLAN ID using the advanced 802.1Q VLAN option (see
802.1Q-Based VLANs in an Advanced Configuration
VLAN.
While you add ports to a VLAN, you can specify whether the ports must be tagged or
untagged. Port tagging allows a port to be associated with a particular VLAN and allows the
VLAN ID tag to be added to data packets that are sent through the port. The tag identifies the
VLAN that must receive the data.
By default, all ports are untagged.
Use Browser-Based Access to Add Tagged or Untagged Ports
to an 802.1Q-Based VLAN

To add tagged or untagged ports to an 802.1Q-based VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Browser on page 7.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select VLAN > 802.1Q > Advanced > VLAN Configuration.
The Advanced 802.1Q VLAN Status page displays. The menu on the left displays more
options.
6. Select VLAN Membership.
You can select VLAN Membership only if you already enabled the advanced 802.1Q
VLAN option (see
page 46).
ProSAFE Gigabit Web Managed (Plus) Switches
Create 802.1Q-Based VLANs in an Advanced Configuration
Use VLANS for Traffic Segmentation
49
Create
on page 46), you must add ports to the
Access the Switch Using a Web
on