Use The Prosafe Plus Utility To Set Up Broadcast Filtering - NETGEAR ProSAFE GS105Ev2 User Manual

7. Click the Apply button.
Your settings are saved and the Storm Control Rate table displays.
The previous figure is an example. Your switch might provide more or less ports.
8. Set the storm control rate by doing the following:
a. Select one or more ports.
b. In the Storm Control Rate menu, select the maximum rate.
You can set a rate from 512 Kbps to 512 Mbps. By default, no limit is set.
c. Click the Apply button.
Your settings are saved.
9. To set a different rate for one or more other ports, repeat

Use the ProSAFE Plus Utility to Set Up Broadcast Filtering


To set up broadcast filtering:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
ProSAFE Gigabit Web Managed (Plus) Switches
Optimize Performance With Quality of Service
34
Step 8.