Panasonic WV-CLR920A Operating Instructions Manual page 31

** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
RET
1. Select ALC and press I. The ALC CONT menu
appears.
** ALC CONT **
BACK LIGHT COMP
PRESET
PEAK MODE
MASK SET
LEVEL
RET END
** ALC CONT **
BACK LIGHT COMP
PRESET
PEAK MODE
LEVEL
RET END
OFF
ALC
OFF
ON(DNR-H)
OFF
INT
ATW1
OFF
DC
OFF
OFF
...I.....
- +
ON
OFF
...I.....
- +
2. Move the cursor to PRESET and select ON.
The backlight compensation is automatically set.
3. If you want to change the video output level (picture
contrast), move the "I" cursor for LEVEL and adjust
the level.
4. Move the cursor to RET and press I to return to
the CAM SET UP menu.
2-2. ALC Mode with PRESET OFF
These modes are effective when the main object in the
scene is not located in the centre of the screen and a
source of bright light is located near the centre of the
screen. In these modes, the picture is divided into 48
areas that mask the light to keep the clarity of the pic-
ture.
Note: If ELC is selected, set MASK SET and LEVEL
according to this procedure.
1. Move the cursor to PRESET and select OFF.
The item MASK SET appears on the menu.
** ALC CONT **
BACK LIGHT COMP
PRESET
PEAK MODE
MASK SET
LEVEL
RET
-31-
OFF
OFF
...I.....
- +
END