Table of Contents
Advertisement
Installing the batteries
1
Confirm that the power is turned off.
œ Press the power button to turn off the camera.
œ When the power is turned off, the stand-by indicator
turns off. In addition, if the lens is protruding, it
automatically retracts and closes.
2
Open the battery compartment cover on the bottom of
the digital camera.
œ Push the button on the compartment cover and slide it
outward to open it.
3
Insert two recharged nickel metal hydride batteries in
the battery compartment.
œ Make sure the polarity ((+), (–)) of the batteries is as
indicated in the battery compartment.
4
Close the battery compartment cover.
œ Slide the compartment cover in the direction of the arrow until it clicks.
NOTE
œ Battery power is still used even when the digital camera is turned off. It is recommended that
you remove the batteries from the digital camera when it is not being used. However, when the
batteries are removed for a long period, the date and time settings may be cleared. When
reinstalling recharged batteries, recheck the date and time settings (see page 46).
Power button
English
26
Advertisement
Table of Contents
