Table of Contents
Advertisement
SETTING THE PLAYBACK MODE
The data of the images and recordings captured with this digital camera are saved as one of four
following types: still image data, sequential shot data, video clip (image and sound) data, or audio
data. Therefore, it is necessary to set the type of data you wish to play back before starting
playback.
œ Playback modes
Still image playback mode
œ
For viewing the still image data. Saved enlarged images (with the playback zoom) (see page
105) and copied images (see page 118) can also be viewed in the still image playback mode.
Sequential shot playback mode
œ
For viewing sequential shot data.
Video clip playback mode
œ
For viewing video clip data.
Audio recording playback mode
œ
For listening to audio recording data.
1
Turn the selector dial to the desired playback mode.
W: Still image playback mode
To view images captured in the still image shooting
mode (see page 98).
Y: Sequential shot playback mode
To view images captured in the sequential shot
shooting mode (see page 102).
X: Video clip playback mode
To view video clips recorded in the video clip shooting
mode (see page 103).
P: Audio recording playback mode
To listen to audio recordings (see page 107).
2
Set the main switch to Ô, and press the power button.
œ The power is turned on.
œ A playback image (or the Playback Option Setting
Screen) appears on the LCD monitor.
œ When playing back an audio recording, go to "Points
concerning the audio recording playback mode" on the
next page.
Selector dial
MONITOR OFF
Main switch
English
96
Advertisement
Table of Contents
