Table of Contents
Advertisement
SCENE SELECT FUNCTION
6
Enter a name for the settings. Up to 6 characters can
be entered.
œ For entering the name, see "ENTERING TEXT" on page
111.
7
Press the SET button.
œ The screen to confirm the settings appears. After you confirm the settings, the Store
Settings Screen turns off.
Play back a captured image and store the
shooting settings
The shooting settings of a captured image can be stored as your original shooting settings.
1
Display the desired image [pages 96 to 103].
2
Press the MODE button for at least 2 seconds to display the Information Screen.
3
Press the SET button.
œ The Store Settings Screen appears.
œ The rest of the procedure is the same as that beginning in step 3 on page 94.
HELP
œ If the settings cannot be stored...
The settings cannot be stored in the following cases.
Images captured with the scene select function; images captured with another digital
camera.
Resized images; images copied from a sequential shot series or video clip.
Images that have been enlarged using the digital zoom.
NOTE
To modify the settings based on a stored setting
(1) Display the Information Screen, select the original settings you wish to change, and turn off
the Information Screen once.
(2) Change the shooting settings.
(3) Display the Information Screen, and press the SET button.
œ "OVERWRITE?" appears.
(4) Press the SET button, and enter a name for the settings.
(5) Press the SET button.
œ After storing the settings, the Information Screen turns off.
95
English
INPUT SETTING TITLE
PARADE
_<
ABCDE
SCROLL
SELECT
Advertisement
Table of Contents
