X.mono Back Stroller Handle; Folding The Mono Back For Transport; Folding/Unfolding Frame; Aa.check-Out - Sunrise Medical Quickie IRIS Owner's Manual

Hide thumbs Also See for Quickie IRIS:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENG LI S H
X. MONO BACK STROLLER HANDLE
Height/Angle Adjustment
a. Press button (A) on the stroller handle so that it releases the push handle.
b. Adjust the push handles to a comfortable position.
NOTE– ALWAYS lock Push handles by moving them slightly being sure to hear the mechanism click into the
locked position.
Y. FOLDING THE MONO BACK FOR TRANSPORT
Height/Angle Adjustment
a. Push down on the release lever(B) and fold the backrest forward for easier transport of the chair.
b. To return the back to the riding position just pull up on the back until it locks into place at the original
position.
NOTE– AFTER FOLDING OR UNFOLDING THE MONO BACK, ALWAYS check to make sure it is in the
locked position by moving it slightly and listening for the mechanism to click into the locked position.
Z. FOLDING / UNFOLDING FRAME (optional)
1. Unfolding
a. Attach the wheels and make sure they are locked in the axle sleeves
b. Push down on folding struts (C) until they Lock. Make sure lock handle(D) is down and double check
that the frame is locked by pushing inwards on the frames.
c. Add the seating system, and footrests,
2. Folding
a. Remove the rider, seating system, and Flip-up the footplates. Disengage the wheel-locks.
b. Unlock the mechanism by pulling up on the lock handle(D), then using both hands, grasp the folding
struts while pushing on the locking lever release buttons(E) with your thumbs.
c. Once the chair starts to fold, push the frames together until the chair is fully folded
d. Remove the Wheels using the Quick Release buttons. The chair is ready for transport or storage.
AA. CHECK-OUT
Once the wheelchair is assembled and adjusted, it should roll smoothly and easily. All accessories should also
perform smoothly. If you have any problems, follow these procedures:
1. Review assembly and adjustment sections to make sure the chair was properly prepared.
2. Review the troubleshooting guide.
3. If your problem persists, contact your authorized supplier. If you still have a problem after contacting your
authorized supplier, contact Sunrise customer service. See the introduction page located in the front of this
User's Manual for details on how to contact your authorized supplier, or Sunrise customer service.
31
32
33
34
19
VIII. USE AND MAINTENANCE
A
C
E
E
31
32
B
33
D
34
D
MK-100151 Rev. B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zippie iris

Table of Contents