Panasonic KX-HCM280 Operating Instructions Manual page 122

Operating Instructions
Problem
Red indicator
continues
blinking.
Image Transfer
on e-mail or FTP
does not work.
Timer mode
transfers older
images.
122
About Network Camera Setup
If you cannot access Network Camera, the Network Camera
hardware may be defective. Call our customer call center.
• Default Gateway and DNS server address should be set up on
Network window on page 60.
• If FTP does not work properly, ask your ISP or network
administrator about the transferring mode of FTP server.
[Passive Mode] or [Active Mode] is available.
• Select [One Time] for Login Timing when transferring images
by FTP in short duration time.
Short interval of Image Buffer Frequency makes Network Camera
transfer the older images. Set the interval long enough to transfer
the images. Buffered Image screen enables you to check this
setting.
Cause and Remedy