Cleaning Tools; Removing Hose; Select Proper Tool; Attach Wand And Tools - Hoover u5491900 Owner's Manual

Hide thumbs Also See for u5491900:
Table of Contents

Advertisement

Available languages

Available languages

How to attach tool cover
The tool cover
2.13
is designed with
a "break-away"
feature which al-
lows it to snap free
if it is pushed open
too far.
To reattach, align
hinges of cover
with slots on sides
of tool storage area.
Push cover down to
secure in place.
2.14
A

Select proper tool

2.15
D
C
E
F
C. Dusting brush may be used for carved
furniture, table tops, books, lamps, lighting
fixtures, venetian blinds, baseboards, shut-
ters, and registers.
D. Furniture nozzle may be used for up-
holstered furniture, draperies, mattresses,
clothing, automobile interiors, and carpeted
stairs.
E. Crevice tool* may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs
and baseboards.
F. Wands are used to give extra length to
your hose. Use them with any of the above
tools.

Cleaning tools

Tools allow for cleaning surfaces above the
floor and for reaching hard to clean areas.
The cleaner is ready for tool use when handle
is in upright position.
CAUTION: Agitator continues to rotate while
cleaner handle is in upright position. Avoid
tipping cleaner or setting it on furniture,
fringed area rugs or carpeted stairs during
tool use.

Removing hose

When using cleaning tools, cleaner handle
should be in the upright position. Also, turn
cleaner OFF before disconnecting and con-
necting hose to hose tube (A).
To use hose, lift hose end as shown.
Lower cover (B) onto hose tube.
B
When you are finished cleaning with the
tools, be sure to lift cover from hose tube
and reposition hose end into tube.

Attach wand and tools

2.16
H
G
Attach tool or wand to the hose (G).
Attach second wand or tool to wand (H) by
pushing it firmly onto the wand.
Twist wand or tool slightly to tighten or
loosen the connection.

How to clean tools

To clean the hose, wipe off dirt with a cloth
dampened in a mild detergent. Rinse with a
damp cloth.
Cleaning tools may be washed in warm water
with a detergent. Rinse and air dry before
using.
9

Advertisement

Chapters

Table of Contents
loading

Table of Contents