Install Drivers And Software; Driver Installation Under Windows Xp Embedded - Siemens Simatic box pc 627b Operating Instructions Manual

Maintenance and service

11.4 Install drivers and software

11.4 Install drivers and software
11.4
Notice
Before you install new drivers or updates for multilingual operating systems, (MUI
versions),the regional settings for menus and dialogs and the default language must be
reset to US English.
Install the drivers and software from the included "Documentation and Drivers". Procedure:
1. Place the CD in the CD ROM drive.
2. Run
3. Select
4. Select the operating system in
5. Install the desired driver.
Notice
For new Windows 2000 / XP installations, the chipset driver must be installed before you
install any other drivers.
11.4.1

Driver installation under Windows XP Embedded

The driver installation under Windows XP Embedded is conducted in the same way as under
XP Professional. Pay attention to the installation instructions of the driver manufacturer.
When drivers are being installed under Windows XP Embedded, you may see a message
that the Windows XP Installation CD or SP2 CD is required.
In this case, insert the Restore DVD. The required files are in the \Drivers_XPE folder.
11-26
START
.
Drivers & Updates
in the tab.
Drivers & Updates
.
Operating Instructions, Release 05/2006, A5E00362052-03
SIMATIC Box PC 627