Message Display - Panasonic Lumix DMC-LZ1GN Operating Instructions Manual

Panasonic digital camera operating instructions
Table of Contents

Advertisement

Message Display

Confirmation messages or error messages
will be displayed on the screen in some
cases.
Major messages are described below as
examples.
[CURRENT BATTERY TYPE SETTING:
OXYRIDE] / [CURRENT BATTERY TYPE
SETTING: ALKALINE/Ni-MH]
If the type of batteries in use is different
from the one indicated in the message,
select the type of batteries on [BATTERY
TYPE] in the [SETUP] menu. (P23)
[THIS MEMORY CARD IS PROTECTED]
Unlock [LOCK] of the Write-Protect switch
on the SD Memory Card. (P19)
[NO VALID IMAGE TO PLAY]
Play back after recording or after inserting
a card with a recorded picture.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, delete
or overwrite the picture.
[THIS PICTURE CANNOT BE
DELETED ] / [SOME PICTURES CANNOT
BE DELETED]
The pictures not based on the DCF
standard cannot be deleted.
[CANNOT BE SET ON THIS PICTURE ] /
[CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF
standard, the DPOF print cannot be set.
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have exceeded the number of pictures
that can be set at once with [MULTI
DELETE]. Once delete the selected
pictures and then repeat deleting multiple
pictures.
96
VQT0P83
Others
[NOT ENOUGH SPACE ON BUILT-IN
MEMORY] / [NOT ENOUGH MEMORY IN
THE CARD]
There is no space left on the built-in
memory or the memory card.
• When you copy pictures from the built-in
memory to the memory card (batch copy),
the pictures are copied until the capacity
of the card becomes full.
[SOME PICTURES CANNOT BE
COPIED] / [COPY COULD NOT BE
COMPLETED]
Pictures described below cannot be
copied.
• When there is a picture with the same
name as the picture you want to copy on
the copy destination.
• Files which do not comply with DCF
standard
Moreover, pictures recorded or edited by
other equipment may not be copied.
[BUILT-IN MEMORY ERROR
FORMAT BUILT-IN MEMORY?]
This message will be displayed when you
format the built-in memory on the PC or
remove the batteries without turning the
camera off. Format the built-in memory on
the camera again. The data on the built-in
memory will be deleted.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-lz2gn

Table of Contents