[Stabilizer]; [Af Assist Lamp] - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Panasonic digital camera operating instructions
Table of Contents

Advertisement

Press [
] to display the [REC] mode menu and select the item to set.

[STABILIZER]

This feature detects jitter and
corrects for it
MODE1
The stabilizer operates
(7)
continuously and can assist
during photo composition.
MODE2
The jitter is compensated for
(8)
when the shutter button is
pressed. There is a greater
stabilizing effect.
OFF
When image stabilization is not
desired.
e.g. When using a tripod.
The stabilizer function may not work in
the following cases so take special care
not to move the camera when pressing
the shutter button.
When too much jitter occurs.
When the zoom magnification is high.
In digital zoom range.
When taking pictures while following
subjects in motion.
When the shutter speed is extremely
slow due to dark conditions or other
reasons.
In Intelligent mode [
selectable.
It is fixed to [MODE2] in [SELF
PORTRAIT] mode and [OFF] in
[STARRY SKY] mode.
In motion picture mode [i], [MODE2]
cannot be set.
Advanced-Shooting
], [OFF] is not
-  -

[AF ASSIST LAMP]

N
Focusing in low light conditions
becomes easier
Illuminating the subject with the AF assist
lamp allows the camera to focus on the
subject in low light conditions.
If the AF assist lamp is set to
[ON], an AF area with a size
wider than usual is displayed
and the AF assist lamp A turns
on.
ON
The AF assist lamp turns on
under low light conditions. In this
time, the AF assist lamp icon
[S] appears on the screen. The
effective range of the AF assist
lamp is 1.5 m.
OFF
The AF assist lamp does not turn
on.
Be sure of the following points when the
AF assist lamp is in use.
Do not look into the AF assist lamp
closely.
Do not cover the AF assist lamp with
your fingers or other objects.
When you do not want to use the AF
assist lamp (e.g. when you take a picture
of animals in a dark place), set the [AF
ASSIST LAMP] to [OFF]. In this case, it
becomes difficult to focus on the subject.
The AF assist lamp is fixed to [ON] while
the camera is in intelligent mode [
You cannot use the AF assist lamp in
[SELF PORTRAIT], [SCENERY], [NIGHT
SCENERY], [SUNSET], [FIREWORKS]
and [AERIAL PHOTO].
[OFF] is set as initial setting in [PET]
mode.
(P19)
A
].

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents