[ASPECT CONV.] (P82)
[ROTATE] (P83)
[ROTATE DISP.] (P83)
PRINT WITH DATE
[AUDIO DUB.] (P87)
∫ Functions that cannot be used when the component cable is connected
[LCD MODE]/[HISTOGRAM]/[TITLE EDIT]/[TEXT STAMP]/[RESIZE]/[TRIMMING]/
[LEVELING]/[ASPECT CONV.]/[AUDIO DUB.]/[COPY]/[MULTI] settings of [DPOF PRINT]/
[MULTI] settings of [PROTECT]/[DELETE MULTI]/Creation of still pictures from motion
pictures
Troubleshooting
First, try out the following procedures (P107–113).
If the problem is not resolved, it may be improved by selecting [RESET] (P22) on the
[SETUP] menu when taking pictures.
The camera cannot be operated even when it is turned on.
•
The battery is not inserted correctly. (P13)
•
The battery is exhausted.
The LCD monitor turns off while the camera is turned on.
•
Is [AUTO LCD OFF] (P21) of the [ECONOMY] mode active?
> Press the shutter button halfway to cancel these modes.
•
The battery is exhausted.
The camera turns off immediately after it is turned on.
•
The battery is exhausted.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] mode etc. (P21)
The [CHARGE] lamp flashes.
•
Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or charging may remain incomplete.
•
Are the terminals of the charger or battery dirty?
> Wipe off the dirt using a dry cloth.
•
Pictures taken with Y or X
•
Motion pictures
•
Still pictures with audio
•
Pictures stamped with [TEXT STAMP]
•
Motion pictures
•
Protected pictures
•
Multi playback
•
[CALENDAR]
•
Pictures stamped with [TEXT STAMP]
•
Motion pictures
•
Protected pictures
Battery and power source
Others
107
VQT1S07