Panasonic BL-C30 Operating Instructions Manual page 29

Basic
(1) Network
(2) Wireless
(3) UPnP
(4) Viewnetcam.
com
(5) Date and Time Sets the date and time, automatic time adjustment and
(6) Camera
Account
(7) Administrator
(8) General User
Advanced
(9) Image Display
(10) Multi-Camera
(11) Buffer/Transfer Sets image buffer or transfer by timer or sensor. (See page
(12) Operation
Time
If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi-
*1
Camera Setup page] settings, changes will not be applied to the video (Motion JPEG)
viewers. Restart the camera to make changes applied to all video viewers.
Configures the network settings such as connection mode
to connect the camera to the network (see page 31).
Configures wireless network (see page 36).
Enables automatic port forwarding or shortcut to the
camera (see page 40).
Registers with the Viewnetcam.com service (see page 41).
adjust clock for daylight saving time settings (see page 43).
Sets camera name, white balance, AC power source
frequency and pan/tilt range (see page 45).
Sets authentication setting and administrator security (user
*1
name and password) (see page 49).
Sets general user security (user name and password) and
*1
general user's feature restriction (see page 53).
Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, Limit Continuous Motion
JPEG language and banner (see page 55).
*1
Sets the camera IP address or host name, camera name on
*1
the Multi-Camera page (maximum 12 cameras) (see page
58).
60 or page 68).
Sets time period to display camera images (see page 78).
Operating Instructions
29