Setting An Ip Address On Your Pc - Panasonic BL-C30 Operating Instructions Manual

3.6 Setting an IP Address on Your PC

Your PC's IP address can be assigned by the following procedures.
1.
Display the TCP/IP Properties window.
• The steps are different depending on your OS. The steps are shown
below.
OS
Windows XP
Windows 2000
Windows Me,
Windows 98SE
• When using Windows XP and Windows 2000, log in as an administrator
to access the TCP/IP Properties window.
2.
Enter IP address and subnet mask.
3.
Click [OK].
• In Windows Me or Windows 98SE, the PC needs to be restarted to enable
the settings.
Local IP Address
Local IP address is the network ID that is not used on the Internet. They are
classified into Class A, Class B and Class C, as shown below. Set the IP address
in the range of the number specified in the class corresponding to your local
network scale.
Class
Class A
Class B
Class C
[Start] ( [Settings])
Internet Connections]
Connection] in use
[TCP/IP] [Properties]
[Start] [Settings]
Connections]
[Properties]
[Properties]
[Start] [Settings]
[TCP/IP] with adaptor in use
[Specify an IP address]
Subnet Mask
255. 0. 0. 0
255. 255. 0. 0
255. 255. 255. 0
Steps
[Control Panel]
[Network Connections]
[Properties]
[Use the following IP address]
[Control Panel]
[Local Area Connection] in use
Select Internet Protocol [TCP/IP]
[Use the following IP address]
[Control Panel]
[Properties]
Local IP Address
10. 0. 0. 1
172. 16. 0. 1
192. 168. 0. 1
Operating Instructions
[Network and
[Local Area
Select Internet Protocol
[Network and Dial-up
[Network] Select
[IP Address]
— 10. 255. 255. 254
— 172. 31. 255. 254
— 192. 168. 0. 254
103