Cisco 7204Vxr Overview - Cisco 7200 VXR User Manual

Chapter 1 Cisco 7200 VXR Product Overview
Table 1-1 Cisco 7200 VXR Physical Specifications (continued)
Description
Safety
EMI
1. Mbps = megabits per second.
2. BTU = British thermal units.
3. VAC = volts alternating current.
4. A = amperes.
5. Hz = hertz.
6. AWG = American Wire Gauge.
7. VDC = volts direct current.
8. cfm = cubic feet per minute.
For a chassis footprint, additional dimensions, and clearance
Note
requirements for the Cisco 7200 VXR routers, see the "Site
Requirement Guidelines" section on page 2-4 in Chapter 2,
"Preparing for Installation."

Cisco 7204VXR Overview

The Cisco 7204VXR supports multiprotocol, multimedia routing and bridging
with a wide variety of protocols and port adapter combinations available for
Cisco 7200 series routers. In addition, the Cisco 7204VXR midplane provides
increased support for multiple high-bandwidth port adapters.
The Cisco 7204VXR has four slots (slot 1 through slot 4) for port adapters, one
slot for an input/output (I/O) controller, and one slot for a network processing
engine or network services engine. You can place the port adapters in any of the
four available slots. (See Figure 1-1.)
78-5469-03
Specification
UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001,
AS/NZS 3260, IEC 60950, IEC 60825, EN 60825, 21CFR1040
FCC Class A (47 CFR, Part 15), ICES-003 Class A, EN55022 Class B,
CISPR22 Class B, AS/NZS 3548 Class B, and VCCI Class B
Cisco 7200 VXR Installation and Configuration Guide
Cisco 7204VXR Overview
1-5