5.4.4 IEEE 802.1X Settings (KX-UT248 only)
Value Range
Default Value
Web User Interface Reference
IEEE8021X_AUTH_PRTCL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
IEEE8021X_USER_ID
Value Format
Description
Value Range
Default Value
Web User Interface Reference
IEEE8021X_USER_PASS
Value Format
Description
194
Administrator Guide
•
Y (Enable)
•
N (Disable)
N
Enable IEEE802.1X (Page 83)
String
Specifies the authentication method used with the IEEE 802.1X
protocol.
Note
•
This setting is available only when "VLAN_ENABLE" is set to
"N".
•
1 (PEAP)
•
0 (EAP-MD5)
0
Authentication Protocol (Page 84)
String
Specifies the authentication ID required for IEEE 802.1X
authentication.
Note
•
This setting is available only when "VLAN_ENABLE" is set to
"N".
Max. 127 characters (except ", &, ', :, <, >, and space)
Empty string
Authentication ID (Page 84)
String
Specifies the authentication password used for IEEE 802.1X
authentication.
Note
•
This setting is available only when "VLAN_ENABLE" is set to
"N".
Document Version
2012-02