Table of Contents
Advertisement
Successive Shooting in Other Cases
If successive shooting is to be performed after the tape has been run, the cassette has been
ejected, or when using a tape which has only been recorded part-way, follow the procedures
outlined below.
1,2
1
Press the PLAY button while watching the viewfinder screen and play back the tape.
2
At the place where continuity between frames is to be provided, press the PLAY (or STOP)
button again to stop the tape.
3
Press the RET button on the lens. Preparations for frame-to-frame continuity are made
about two seconds later.
4
Press the VTR START button of the unit or the VTR button of the lens to start recording.
– 93 –
4
3
Advertisement
Table of Contents
