Table of Contents
Advertisement
Using the Sony BP-90 Battery Pack
Using the Sony BP-L60/BP-L90 lithium-ion Battery Pack
1
Mount the accessory battery mounting connector.
(See the preceding page.)
2
Mount the BP-90 battery case.
Tighten the mounting screws.
Tichten the power supply contact screws.
Insert the top of the detached cover in the direction of the arrow.
Align the hole at the bottom (metal part) of the cover with the bottom of the case and
mount the cover to the battery mounting connector with the screw.
1
Attach the supplied battery mounting terminals.
2
Attach the lithium-ion battery holder.
As shown in the figure, remove the battery clamp, and attach the holder using the
mounting screws.
Tighten the power supply contact screws.
Put the battery clamp back into place.
|Notes{
ÁThe unit's power must be set to OFF before the plug is inserted or removed.
ÁTake care when attaching the battery case/battery holder that the wires are not pinched.
– 27 –
Advertisement
Table of Contents
