Recording With An External Vtr Instead; Using The 26-Pin Output Adapter - Panasonic AJ-D700P Operating Instructions Manual

Recording With an External VTR Instead of the Internal VTR
Using the 26-pin Output Adaptor
Connections
The method of connecting the external VTR is the same as that described in " Recording Simulta-
neously with the Internal VTR and an External VTR" .
See " Connections" on page 95.
Mounting the 26-pin output adaptor
Consult your local dealer when mounting the adaptor.
1
Set the unit' s internal switches.
1
Remove the side panel on the display window side.
2
Remove the Printed Circuit Board holder and remove the CAMERA ENC Printed Circuit
Board.
3
Set SW101 and SW102 to the 26P side.
2
Mount the 26-pin output adaptor.
CAM ENC Printed Circuit Board
CAM ENC Printed Circuit Board
- -
98
Printed Circuit
Board Holder