Table of Contents
Advertisement
The A2100 amplifier can be set on a tabletop or wall-mounted with screws
or hook and loop tape. Rack-mounting ears are included to install either one
A2100 in a 1U space or two units in a 1U space.
Wall Mounting
The amplifier comes with two wall mounting brackets and attachment screws.
There are two attachment locations on each side of the amplifier for more
mounting options. Hook and loop tape can be used as well.
Back Panel
Wall mounting option
Front Panel
OR
Russound A2100 Installation Manual
Rack Mounting
The rack mounting ears support either one or two amps in a single rack space.
To install one amplifier in a rack space, use the long ear and one of the wall-
mount brackets. The unit can be mounted either to the left or right side of the
rack space.
Single unit rack mounting option
For two units in one rack space, use the flat plate to support and connect them,
and use one wall-mount bracket on each outer side of the units.
When using the two-unit mounting option, the small side ventilation slots on
the amps will be next to one another in the middle of the rack space. To avoid
overheating situations, make sure the copious top panel ventilation holes are
not blocked.
Dual unit rack mounting option
INSTALLATION OPTIONS
5
Advertisement
Table of Contents
