Ipv6 - D-Link DAP-2553 User Manual

Section 3 - Configuration
The IPv6 function allows you access DAP-2553 using an IPv6 address.
Enable
Check this box to enable IPv6.

IPv6:

Get IP
Select either Static to enter your own IP address or Auto to
From: be automatically assigned by a DHCP server or IPv6 gateway.
IP Address:
Assign an IPv6 IP address.
Prefix:
The Prefix is used to determine what subnet an IP address
belongs to. It must be 0~128..
Dafault
Enter the default gateway address. This is usually the IP
Gateway: address of your router.
Note: If IPv6 is enabled, AP Array, QoS, and Traffic Manager will all be disabled. Also, AP Client mode will change to AP mode.
D-Link DAP-2553 User Manual
IPv6
29