Lan - D-Link DAP-2553 User Manual

Section 3 - Configuration
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for
the DAP-2553. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
Get IP Static IP (Manual) is chosen here. Choose this option
From:
if you do not have a DHCP server in your network, or
if you wish to assign a static IP address to the DAP-
2553. When Dynamic IP (DHCP) is selected, the other
fields here will be grayed out. Please allow about two
minutes for the DHCP client to be functional once this
selection is made.
IP Address:
The default IP address is 192.168.0.50. Assign a static
IP address that is within the IP address range of your
network.
Subnet
Enter the subnet mask. All devices in the network must
Mask:
share the same subnet mask.
Default
Enter the IP address of the gateway in your network. If
Gateway:
there is a gateway in your network, please enter an IP
address within the range of your network.
DNS :
Enter a DNS server IP address of your choice.
D-Link DAP-2553 User Manual

LAN

28