Hardware Overview - D-Link DAP-2553 User Manual

Section 2 - Installation
Power Receptacle
The supplied power adapter connects here.
Reset Button
A pinhole button located beside the Ethernet socket is used to reset the
system or restore the factory default settings.
Note: After resetting the unit, you will still be able to access the data
on your hard drives.
LAN (PoE) Port
An Ethernet port that connects the unit to a network. This port can also
be used to supply power to this unit using Power over Ethernet.
D-Link DAP-2553 User Manual

Hardware Overview

Power LED
This light will be solid green when the unit is powered on.
5GHz LED
This light will be flickering green when the 5GHz frequency is in use.
2.4GHz LED
This light will be flickering green when the 2.4GHz frequency is in use.
LAN LED
This light will be flickering green when there is active LAN traffic.
11