Outdoor Unit Installation - Samsung AC052HBMPKH Manual

Outdoor unit installation

The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration, particularly
if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to an appropriate
support(wall or ground).
Fix the outdoor unit with anchor bolts.
• The anchor bolt must be 20mm or higher from the base surface.
Anchor bolt hole
510
720
A Type : AC035HCADKH/ AC026HCADKH
Anchor bolt hole
660
880
B Type :AC060HCADKH / AC071HCADKH / AC052HCAPKH
• Make a drain outlet around the base for outdoor unit drainage.
• If the outdoor unit is installed on the roof, you have to check the ceiling strength and waterproof the unit.
Outdoor Unit Support
OUTDOOR UNIT INSTALLED ON THE WALL BY RACK
- Ensure the wall will be able to suspend the weight of rack and outdoor unit ;
- Install the rack close to the column as much as possible ;
- Install proper grommet in order to reduce noise and residual vibration
transferred by outdoor unit towards wall.
When installing air guide duct
• Check and make sure that screws do not damage the copper pipe.
• Secure air guide duct on guard fan.
10
Anchor bolt hole
Outdoor
Unit
Outdoor Unit
Anchor bolt
Support
Base Surface
660
880
B Type : AC052HCADKH
Soft rubber designed to
cut off vibration from rack
to wall. (not supplied with
(Unit : mm)
Designed to cut off
residual vibration
from outdoor unit to
rack. (not supplied
with product)
product)