Oregon Scientific MP305 User Manual page 19

To preset radio stations:
1. In the "Radio" mode, press the
2. Then press the
NOTE: The unit will preset up to 15 preset stations.
To select a channel:
1. In the "Radio" mode, press the
2. Then use the
To tune a channel:
1. In the "Radio" mode, press the
2. Then use the
NOTE: FM scanning reception may vary in different areas.
To exit the Radio mode:
Simply press the
Menu).
The display in the Radio mode, you will see:
1. Button hold indicator
2. Battery status indicator
3. Frequency display (e.g. 102.35MHz)
4. Information display
MP305 Eng Manl R7 (V1.0) OP
is displayed on the screen period.
key. (The unit will then auto scan radio
stations and record them in chronological order).
in the "Preset" mode.
button to move up or down. (The preset
channels will show on the screen - both the FM band number
and the preset channel number).
in the "Tune" mode. (If the screen says "Preset" then you will
need to press the key twice).
button to move up or down. (The FM band number
will increase or decrease as you move the key. Simply tune until
you find a clear channel you want to listen to).
or MENU / ON button. (You will return to the Main
16
¶´ƒ
/ OFF key once so "Auto Scan"
/ OFF button to set the screen
/ OFF button to set the screen
16
12/23/04, 12:28 PM