Amplifier (To Audio Amp); Digital Tv - Set-Top Box (Dtv-Stb) Or Dvd Players; Front Control Panel - Panasonic CT 27HL14 Operating Instructions Manual

VCR and Cable Box Connection (Cont.)
Recording a premium (scrambled) cable channel
Procedure
• Press the TV/VIDEO button and the numeric keys on the
remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
• Using your cable box, tune to the premium cable channel
you want to record.
• Begin recording.
To view a different channel while recording:
• Press the TV/VIDEO button and the numeric keys on the
remote control to TV mode.
• Tune the television to a program (except another
premium cable channel).
Amplifier Connection (TO AUDIO AMP)
To listen to the audio through a separate stereo system,
connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note: TO AUDIO AMP terminals can not be connected directly
to external speakers.
CONNECTIONS ON BACK OF THE TV
DIGITAL INPUT
VIDEO
Y
S-VIDEO
P
B
P
R
AUDIO
L
L
R
ANT
R
1 2 1 2 3
COMPONENT
INPUT
VIDEO INPUT
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model's capabilities.
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu.
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
Note: Variable Audio Out is not available in model
CT-27HL14.
• Volume, mute, bass, treble and balance are now
controlled through the television.
Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
PROG
OUT
CABLES NOT SUPPLIED
EXTERNAL AMPLIFIER
VIDEO
L
R
90.7 MHZ
TO AUDIO
AMP
O
PTIONAL
Digital TV - Set-Top Box (DTV-STB) or DVD
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STV must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB (Digital TV Set-Top-
Box) or DVD player to the back of television.
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
DIGITAL TV OUTPUT
Y P P
R
B
MAIN
VIDEO
R-AUDIO-L - VIDEO S-VIDEO
NTSC OUTPUT
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model's capabilities.

Front Control Panel

The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
Note: The ON/OFF indicator LED (red) will be lit when set
is on.
Front panel for CT-32HC14
CH
POWER VOL
CH
ON/OFF INDICATOR
POWER ON/OFF
POWER
VOLUME CHANNEL
Front panel for CT-27HL14
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the video inputs. See the optional equipment manual for
details.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button and the numeric keys to select
VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
E C
QUIPMENT ONNECTIONS
TERMINALS ON BACK OF TELEVISION
Y
DIGITAL
S-VIDEO
INPUT
PROG
P
B OUT
VIDEO
VIDEO
P
R
AUDIO
L
L
R
R
1 2 3
COMPONENT 1 2 INPUT
VIDEO INPUT
ANT
CABLES NOT INCLUDED
VOL TV / VIDEO
HPJ
S-VIDEO VIDEO L - AUDIO - R
INPUT 4
INPUT 4
ACTION TV/VIDEO S-VIDEO VIDEO L - AUDIO - R
7
TO AUDIO
AMP