Time Settings - Panasonic KX-TGA715E Operating Instructions Manual

TGA715E_717E(e-e).book Page 18 Wednesday, August 2, 2006 2:46 PM
Handset/Base Unit Settings
Base unit settings
Base unit
settings menu
Ringer Volume
Call Options
Other Options
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.

Time settings

Alarm
An alarm will sound for 3 minutes at the set time once or daily. Set the date and time
beforehand (page 16).
1
{j/OK} i "Handset Setup" i {>}
2
"Time Settings" i {>}
3
"Alarm" i Press {>} 2 times.
4
Select an alarm mode. i {>}
Turns alarm off. Press {>} again, then press {ih} to finish.
Off
The alarm sounds once at the set time. Enter the desired day and month.
Once
An alarm sounds daily at the set time.
Daily
5
Enter the desired hour and minute. i {j/OK}
6
Select the desired ringtone. i {>}
7
"Save" i {>} i {ih}
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm will not sound until the call has ended.
L If you select "Once", the setting will change to "Off" after the alarm sounds.
18
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Sub-menu
—
Recall/Flash
Base Unit PIN
Repeater Mode
Feature (default setting)
Base unit ringer volume (Medium)
Change the recall time ("100 msec.").
Change base unit PIN ("0000").
– Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i {j/OK}
("Off")
*1
*2