Taking Pictures with the Self-timer
1
Press w [ ].
2
Select shutter speed using e/r
or w [ ].
SELFTIMER
OFF
10SEC.
2SEC.
SELECT
3
Press [MENU/SET].
You can also press the shutter button
•
halfway to set.
•
When 5 seconds pass without any
operation, the setting selected at the time
is automatically adopted.
4
Press the shutter button halfway
to focus and then press it fully to
take a picture.
P
CANCEL
•
The self-timer indicator
A blinks and the
shutter is activated
after 10 seconds (or 2
seconds).
•
If you press [MENU/
SET] when the self-
timer is being set, the
self-timer setting is cancelled.
Advanced-Shooting
SET
10
M
19
MENU
•
When using a tripod or in other cases,
setting the self-timer to 2 seconds is
a convenient way to stabilize the jitter
caused by pressing the shutter button.
•
When you press the shutter button
fully with one stroke, the subject is
automatically focused just before the
recording. In dark places, the self-timer
indicator blinks and then it may turn on
brightly to work as the AF assist lamp for
focusing on the subject.
•
In Intelligent auto mode [
or [OFF] is selectable.
•
In [SELF PORTRAIT] mode, [2 SEC.] or
[OFF] is selectable.
•
When you set the self-timer in burst
mode, the camera starts taking a picture
2 or 10 seconds after the shutter button
is pressed. The number of pictures taken
at one time is fixed to 3.
•
We recommend using a tripod when
setting the self-timer.
•
You cannot use the self-timer in [HI-
SPEED BURST].
A
- -
], [10 SEC.]