Chapter 2: Maintenance & Troubleshooting; Maintenance; Servicing And Safety; Instrument - Raymarine ST60 Rudder Angle Indicator Instrument Owner's Handbook Manual

Chapter 2: Maintenance & Troubleshooting
Chapter 2: Maintenance & Troubleshooting

2.1 Maintenance

Servicing and safety

• Raymarine equipment should be serviced only by authorized Raymarine ser-
vice technicians. They will ensure that service procedures and replacement
parts used will not affect performance. There are no user serviceable parts in
any Raymarine product.
• Some products generate high voltages, so never handle the cables/connec-
tors when power is being supplied to the equipment.
• When powered up, all electrical equipment produces electromagnetic fields.
These can cause adjacent pieces of electrical equipment to interact with one
another, with a consequent adverse effect on operation. In order to minimize
these effects and enable you to get the best possible performance from your
Raymarine equipment, guidelines are given in the installation instructions, to
enable you to ensure minimum interaction between different items of equip-
ment, i.e. ensure optimum Electromagnetic Compatibility (EMC).
• Always report any EMC-related problem to your nearest Raymarine dealer.
We use such information to improve our quality standards.
• In some installations, it may not be possible to prevent the equipment from
being affected by external influences. In general this will not damage the
equipment but it can lead to spurious resetting action, or momentarily may
result in faulty operation.

Instrument

Certain atmospheric conditions may cause condensation to form on inside of the
instrument window. This will not harm the instrument and can be cleared by
increasing the instrument illumination to the brightest setting.
Periodically clean your ST60 instrument with a soft damp cloth. Do NOT use
chemical and/or abrasive materials to clean the instrument.

Transducer

Refer to the Installation and Maintenance instructions supplied with the
transducer.
3