Caller Id Service; Using Caller Id Service - Panasonic KX-TG5921AL Operating Instructions Manual

TG5921AL_5922AL.book Page 25 Friday, February 24, 2006 3:42 PM

Using Caller ID service

This unit is Caller ID compatible. To use
Caller ID features (such as displaying
caller phone numbers), you must
subscribe to Caller ID service. Consult
your service provider/telephone company
for details.
Caller ID features
When an outside call is being received, the
calling party's telephone number is
displayed.
Telephone numbers for the last 50 different
callers are logged in the caller list by the
most recent call to the oldest.
L If the unit cannot receive caller
information, the following is displayed:
– "Out of area": The caller dialled
from an area which does not provide

Caller ID service.

– "Private caller": The caller
requested not to send caller
information.
L If the unit is connected to a PBX system,
caller information may not be received
properly. Consult your PBX supplier.
L If the name display service is available in
your area, the display shows caller
names. For further information, please
contact your service provider/telephone
company.
Missed calls
If a call is not answered, the unit treats the
call as a missed call. The number of
missed calls is shown on the handset
display. This lets you know if you should
view the caller list to see who called while
you were out.
Caller ID Service
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name is displayed
and logged in the caller list.
Call waiting and Caller ID
compatible
If you subscribe to Caller ID service, your
handset displays the 2nd caller's
information while talking. After you hear a
call waiting tone, the caller's phone
number will be displayed.
You can answer the 2nd call, keeping the
1st call on hold.
Follow your service provider/telephone
company instructions using {RECALL}.
L If the phone number is stored in the
phonebook with its name, the caller's
name will also be displayed.
L Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or
muted for a short period of time. This is
not a fault of the product as these events
are normal.
L The tones are generated by your service
provider/telephone company.
25