Draw Mode Performance - Yamaha TNR-e Quick Manual

Draw Mode Performance

You can even spin loop-shapes you create in the Random mode by holding the [L4] button and running a finger around the
matrix in the direction and at the speed of the desired spin. The pitches of the notes will change accordingly as the shape spins,
producing loop sound effects. To stop rotation, touch and hold the LED button or double-tap the LED button while holding the
[L4] button.
Holding the [L4] button
Draw Mode Performance
In this mode you can tap individual LED buttons or draw lines or curves on the matrix, and those actions will be played back and
repeated. You can keep adding to your "composition" during playback to build up thick sonic textures.
In the Draw mode you cannot clear only a part of the performance. The entire layer can be cleared by tapping the [CLEAR]
button.
11
TNR-e Quick Guide