Recording Menu - Yamaha TNR-e Quick Manual

Recording Menu

Includes recording and saving recorded files.
Performance operations carried out on the TNR-e can be recorded in real time and saved as a Song or Audio file. Song files
contain all operations carried out from the time recording is begun until it is ended: LED button operations, functions button
operations, and [CLEAR] operations are all recorded in real time. A recorded Song file can then be loaded into the TNR-e and
played back, precisely reproducing the entire performance as it occurred.
On the other hand, Audio files contain all the sounds produced via the TNR-e performance and input via the iPad microphone.
From the File menu, an Audio file can be uploaded to the SoundCloud, and can be copied to other iPhone/iPad applications via
the Clipboard.

Song files can be loaded from the File Menu.

Uploading of Audio files to SoundCloud and copying of Audio files to Clipboard are both available in the File Menu.

To use SoundCloud, access the following URL, then register your name.
http://soundcloud.com/

XY Pad operations (called up by the [EFFECT] button) are not recorded to the Song file.
Recording
TNR-e Quick Guide
For recording and saving a Song.
1. Tap "Display" > "Recording Menu," then select [Song] and tap [Start] in the menu to begin
recording.

The Menus cannot be accessed during recording.
2. When the performance is finished, tap [START/STOP] to stop recording.
3. After confirming the message "Save this Song?," tap [OK] as desired.
If you do not want to save, execute any of the following operations.
• Tap [Cancel].
• Tap the area outside the menu.
• Tap [Top Menu] in the Recording Menu.
• Tap [Done] in the Recording Menu.

If you tap [START/STOP], the already-recorded data is canceled and you can start re-
recording.
4. If you tap [OK] in step 3 and the Song file name entry display appears, enter the desired file
name.

Tapping the file name will call up the on-screen keyboard.
5. Tap [OK] at right of the file name to save the recorded data as a Song file.
For recording and saving Audio files.
1. Tap [Audio] in the Type menu.
2. Tap [Stand By] in the Recording menu to enable recording standby on the TNR-e.
3. Tap [START] in the upper right area of the display to start recording.
Tapping here starts recording of the audio
signals input via the iPad microphone, as
well as the audio signals produced via your
TNR-e performance.
4. Tap [STOP] to stop recording and call up the window for the file operation in the upper right area
of the display.
5. Tap [Save] to save the recorded data as an Audio file.
Tapping [Cancel] aborts saving of the file and closes the window.
Tapping the file name area calls up the on-screen keyboard and allows you to enter the file
name.
Bounce Mode Performance (Layer 14) / Push Mode Performance (Layer 15)
26