Manual Tuning; Manual Tuning (Via Front Panel) - Panasonic TH-42PA20 Operating Instructions Manual

Manual tuning

Before Manual tuning, Regional System must already be set (see page 18).
Press to select the Manual tuning.
Press to access to the Manual tuning.
Press to select the desired Programme Number.
Press to select the higher or lower channel.
STR
When the desired station is found, press to store.
The tuning position is memorized.
TV/AV
Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.

Manual tuning (via front panel)

It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions.
AV3
R - STANDBY STR F / / TV/AV S VIDEO VIDEO L R
G - POWER ON
Helpful Hint (
(1)
After the Manual tuning or the Auto tuning is finished, under the normal viewing condition press
this button to confirm the tuning condition for each Programme Number. If some Programme
Numbers are unused (no TV stations), it is possible to skip such Programme Numbers. Please
refer to the Programme Number Skip operation on page 21.
(2) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to programme No. "0". In that case,
perform manual tune after setting the colour system and sound system in advance. Further, in multi-system VCR,
it is more convenient to set the designated channel to several programme Numbers.
Search Start.
29
Programme
down/up
Search
Return
down/up
TV / AV - Exit
'STR' Button-Store
Manual tuning
STR F / / TV/AV
/
Normalise
When a station
is found.
1 Press (Front panel) until Tuning mode is reached.
F
2 Press or to access Tuning mode.
/ /
3 Press to move between Change programme, Search
TV/AV
and Change TV system.
4 Press or to change programme position or start search.
/ /
When the desired station is found, press
The programme position will flash.
Repeat above procedure to tune additional programme
positions.
Press at any time to exit the Tuning menu.
F
Normalisation)
Tuning Channels
Tuning menu
Sys select Australia
Auto tuning
Access
Manual tuning
Fine tuning
Skip Off
to store.
STR
19