Battery Replacement - Panasonic KX-TG2551ALS, KX-TG2551NZS Operating Instructions Manual

Battery Replacement

If "Recharge" is displayed and/or "
calls even if the battery was fully charged, replace the battery with a new
Panasonic N4HKGMB00001 (P-P510) battery.
1 Press the notch on the battery cover
firmly and slide it as indicated by the
arrow.
Remove the old battery and wait for
2
a few minutes.
Then install the new one.
•Insert the battery plug into the
connector as shown.
•Be sure wires are free from being
pressed by the battery body or the
handset cover.
Close the cover. Make sure the handset display shows "
3
when you place the handset on the base unit.
•If it does not show "
minutes; and then insert the battery again. Make sure the handset display
shows "
4 Charge the new battery for about 6 hours in order to display the
battery strength prompt correctly (p. 11).
Black Lead
Black
Lead
", remove the new battery and wait for 10
".
" flashes after a few telephone
Red
Lead
",
47